5 Super Tips for Installing Drywall
in General
as instaling drywall, install drywall, installing drywall
Installing drywall? It’s crucial that you do it properly. Here are some tips to help you put up drywall quickly and efficiently.
1. Fasten the Drywall Using Screws Rather Than Nails
There are various reasons for this approach. Screws attach better. Additionally, if you make a mistake then you can uninstall and reinstall them without creating any damage to the drywall. That’s a good thing!
2. Alternate the Joints
This will help to strengthen them. Verify that the up-and-down seams on the upper panels don’t meet those contained on the lower panels. Providing this extra support can help you prevent future difficulties.
3. Select the Right Drywall Sheet
When installing drywall, you may be surprised at how many lengths and thicknesses are available. If you’re covering a wall that already exists, then use a ¼-inch thick drywall. It’s generally advisable to select lengthier sheets, as you’ll need to cover fewer joints. A word of advice to the wise: before buying the sheets you should verify that you can fit them into your home’s front doorway.
4. Use an Electric Screw Gun
Whether you rent, borrow from friends, or purchase one, it’s advisable to use an electric screw gun to make your job easier. Not only will this improve how fast you insert the screws but enhance the quality of the insertion as well. This tool contains magnetized ends that grip the screw and insert them at the correct deepness.
5. Only Install New Drywall When Necessary
Sometimes it won’t be necessary to install an entire piece of drywall. For instance, sometimes you may only need to replace a single damaged panel on the ceiling. Before you replace the panel, make sure to discover and solve the root cause of the damaged panel. Otherwise, you may need to replace the panel again, and again, and again.
Installing drywall doesn’t have to be a major pain. Use these tips to get things right on the first try!
Mail this post
4 Simple Steps for How to Finish Drywall
in General
as drywall, drywall finishing, Finish drywall, How to finish drywall
4 Simple Steps for How to Finish Drywall
Installing and finishing drywall isn’t impossible to do alone (if you really can’t do it without help), but it can be very time-consuming. If you don’t know how to finish drywall properly, here are 4 simple steps to help you out.
1. Apply the Joint Compound
Mix the joint compound until you get an even and velvety consistency. Next, use a 4-inch finishing knife to add a coat of joint compound along the seams between adjacent pieces of drywall. Then, position drywall tape by pressing it atop the joint compound. Add another layer of joint compound on top of the drywall tape, and then wait for the compound to dry thoroughly.
2. Use a Finishing Knife
In this next step for how to finish drywall, use a 10-inch finishing knife to spread about 1.5-inches of dry-wall compound along both sides of the dry-wall tape. Afterwards, let the compound dry for a full 24 hours.
3. Treat Metal Strips on the Outside Corners Specially
Using a 4-inch finishing knife, add one coat of joint compound on the entire length of the metal strips. Make sure that you completely coat them. Afterwards, let the compound dry for a full 24 hours. Then use a 10-inch knife to add another thinner layer of joint compound, and spread it about 1.5 inches on either side.
4. Cover, Sand, and Paint
Use a 4-inch finishing knife to cover each nail and pit in the drywall. Make sure to smooth it out as you continue. Afterwards, sand along the seams and drywall nails. Then wipe away any dust. This is a basic yet crucial step. Next, you should add a layer of primer to each wall and the ceiling. After the primer has dried completely, paint the walls whichever color you have selected.
Following your drywall installation, these tips will guide you how to finish drywall properly. While the process isn’t impossibly difficult, it can certainly seem that way if you do it improperly.
Mail this post
Can I Use a Drywall Panel Lift at Home?
in General
as Drywall Panel Lift, install drywall, Installing Your Own drywall
Times are rough right now, and let’s face it – no one has the money to be hiring a contractor. But, if you are still interested in making improvements to your home, you can still do it on your own. Most people are now adept at laying a little tile or even texturing walls, but have you ever thought about installing your own drywall? By using a drywall panel lift at home, you can install drywall on walls and ceilings on your home without the help of a contractor.
If you have been trying to install drywall on your own, you know how difficult it can be. And, that’s just for walls. If you have ever tried to install a drywall ceiling, well forget about it! This is a two-person job no matter how clever you think you are. You can make all kinds of tools at home with pieces of wood or ladders, but without the proper equipment, you may be installing a pretty dangerous ceiling!
A drywall panel lift makes it easy for just one single person to install a ceiling. By attaching the drywall to the lift and bringing it up to the level of the ceiling, you will be able to easily hold it in place while you nail away. Not even an extra pair of hands could do more than this.
This is one product that every do-it-yourselfer absolutely has to have. It is much safer than trying to install drywall by yourself, and the job you do will be much cleaner, quicker, and easier. Not only that, the lift will more than pay for itself the first time you use it, instead of paying for an expensive contractor to take his or her time and charge you through the nose for the very same service.
Mail this post
